NukeSystems

🏗️ NukeDock™ — Docking & Power Interface

Ports · Ocean Platforms · Orbit Nodes · Industrial Hubs
(power · data · standardized mate)

⚡ Electric transfer: 5–50 MWₑ
🔌 DC bus: 1–20 kV
📡 Data: 1–40 Gbps
⏱️ Dock cycle: 5–45 min
🔩 Ops/day: 10–200
📏 Mate tolerance: ±5–50 mm
🛡️ Safety zone: 50–500 m
🔋 Buffer support: 1–100 MWh
📈 Lifetime: 30–40 years
🔗 www.NukeDock.com

1️⃣ Universal Mate Standard

🔩 Mate ring ID: 1 standard family
📏 Ring diameter: 0.8–6.0 m
📏 Axial stroke: 50–400 mm
📐 Angular tolerance: ±0.1–2.0°
📏 Lateral tolerance: ±5–50 mm
⚖️ Docked load: 10–600 t
📊 Connector count: 2–24
🔐 Version handshake signed

2️⃣ Capture Mechanism

🧲 Soft-capture system: 1 stage
🔁 Hard-capture system: 1 stage
📏 Capture cone length: 150–900 mm
📊 Capture speed: 0.01–0.30 m/s
📈 Misalign absorption: 5–50 mm
🧮 Damping coefficient: tuned band
📊 Latch confirm sensors: 6–48
🔐 Capture event logged

3️⃣ Clamp & Lock Actuators

⚙️ Clamp actuators: 6–24
📊 Clamp force: 50–8000 kN
🔁 Redundant clamp banks: 2–4
⏱️ Lock time: 5–120 s
📈 Slip margin: 2–10×
🧮 Torque resistance band
📊 Load sharing tolerance: 5–20%
🔐 Lock state sealed

4️⃣ Emergency Release Path

🔁 Release modes: 2–5
⏱️ Release time: 0.5–10 s
📊 Pyro-free option: 100%
📈 Fail-open logic: 1–3 stages
🧮 Stored energy release band
📊 Jam detection latency: 50–500 ms
📡 Release beacon: 1–10 W
🔐 Release packet signed

5️⃣ Structural Dock Frame

🧱 Frame material: steel/composite class
⚖️ Ultimate load: 50–500 t
📈 Fatigue life: 30–40 years
🧮 Load path redundancy: 2–6 paths
📊 Shock pads travel: 5–80 mm
🔁 Seismic/float compliance: 0–3 DOF
📊 Health sensors: 8–120
🔐 Integrity thresholds enforced

6️⃣ Alignment Metrology

📡 Sensors: lidar/laser/camera set
📊 Update rate: 10–200 Hz
📏 Range: 0.5–50 m
📈 Position error: 0.5–10 mm
📐 Angle error: 0.02–0.5°
🧮 Kalman fusion: 50–500 states
⏱️ Converge time: 2–60 s
🔐 Alignment truth signed

7️⃣ Approach Guidance Interface

🧭 Relative nav channel: 1–3
📡 Guidance link: 10–1000 kbps
⏱️ Command latency: 5–80 ms
📈 Approach corridor: 0.5–20 m cone
📏 Rate limits: 0.01–0.30 m/s
🧮 Deadband: 1–10 mm
📊 Hold points: 2–12
🔐 Guidance session keyed

8️⃣ Power Connector Geometry

🔌 Power ports: 2–12
📏 Contact pitch: 10–80 mm
📊 Creepage distance: 20–250 mm
📈 IP sealing class: sealed band
🧮 Contact pressure: tuned band
📊 Mate cycles: 10k–200k
⏱️ Hot-plug enable: 0–1
🔐 Port identity signed

9️⃣ DC Bus Transfer Physics

🔌 DC bus: 1–20 kV
⚡ Transfer: 5–50 MWₑ
📊 Current band: 250–50,000 A
📈 Efficiency: 98.0–99.7%
🧮 Line loss: 0.1–2.0%
📊 Ripple target: 0.5–5%
⏱️ Ramp rate: 0.1–20 MW/s
🔐 Power state attested

🔟 Isolation & Interlocks

🛡️ Isolation stages: 2–5
📊 Insulation monitoring: 10–1000 Hz
⏱️ Trip time: 1–50 ms
📈 Arc detection: 0.2–5 ms
🧮 Fault discrimination: 3–12 classes
🔁 Interlock chain: 10–60 signals
📊 Safe-state map: 5–30 states
🔐 Interlock log sealed

1️⃣1️⃣ Breaker & Switching Stack

⚙️ Breakers: 2–16
📊 Interrupt rating: HVDC class band
⏱️ Open time: 2–30 ms
📈 Pre-charge resistors: 0–8
🧮 Inrush limit: 2–20× control
🔁 Redundant switch paths: 2–4
📊 Health counters: 10–200 params
🔐 Switching proof signed

1️⃣2️⃣ Grounding & Return Path

🧲 Return topology: 1–3
📊 Ground resistance target: 0.1–10 Ω
📈 Touch potential limit: controlled band
🧮 Stray current suppression band
🔁 Bond straps: 2–30
📊 Leakage monitor: 1–50 mA band
⏱️ Ground verify: 0.2–5 s
🔐 Ground OK token

1️⃣3️⃣ Data Connector Stack

📡 Data ports: 2–16
📊 Link type: fiber/copper option
📶 Throughput: 1–40 Gbps
⏱️ Latency local: 0.1–10 ms
📈 BER target: 1e−12–1e−15
🧮 FEC overhead: 2–25%
🔁 Redundant links: 2–8
🔐 PHY identity attested

1️⃣4️⃣ Time Sync Interface

⏱️ Sync accuracy: 10 ns–1 ms
📊 PTP profile: industrial class
🔁 Redundant clock inputs: 2–4
📈 Holdover: 1–48 h
🧮 Jitter budget: 10–500 ns
📊 Timestamping: hardware 100%
⏱️ Sync lock time: 1–60 s
🔐 Time integrity signed

1️⃣5️⃣ Protocol Handshake Layer

🔐 Root-of-trust: hardware module
📊 Session keys: 1–4 per dock
⏱️ Handshake time: 0.2–5 s
📈 Auth factors: 2–4
🧮 Role table entries: 10–500
🔁 Replay defense: nonce + counter
📊 Anti-rollback: 100%
🔐 Attestation report signed

1️⃣6️⃣ Command & Telemetry Bus

📡 Telemetry rate: 1–5000 Hz
📊 Channels: 100–5000 tags
⏱️ Control loop: 5–100 ms
📈 Buffered events: 1–30 days
🧮 Compression: 2–30×
🔁 Dual-bus redundancy: 2–4
📊 Deterministic schedule: 100%
🔐 Logs immutable

1️⃣7️⃣ Dock Cycle Automation

⏱️ Cycle: 5–45 min
🔁 Steps: 12–80
📊 Auto-checks: 30–300
📈 Human actions: 0–6
🧮 Timeout rules: 10–200
📊 Recovery scripts: 5–60
🔁 Retries per step: 1–5
🔐 Audit trail signed

1️⃣8️⃣ Ops Throughput Engineering

🔩 Ops/day: 10–200
⏱️ Turnaround: 5–45 min
📊 Queue lanes: 1–20
📈 Parallel mates: 1–12
🧮 Utilization target: 30–90%
📊 Peak window: 1–12 h
🔁 Priority classes: 3–10
🔐 SLA ledger sealed

1️⃣9️⃣ Buffer Coupling Port

🔋 Buffer support: 1–100 MWh
⚡ Buffer power: 1–200 MW
📊 DC/DC stages: 1–4
⏱️ Blackstart inject: 1–120 s
📈 Surge absorb: 1–20×
🧮 SOC window: 10–90%
🔁 Island mode: 1–3 profiles
🔐 Buffer rights signed

2️⃣0️⃣ Thermal Constraint Interface

🌡️ Connector temp limit: 60–180 °C
📊 Cooling option: air/liquid
🔁 Cooling loops: 1–4
📈 ΔT allowed: 10–80 °C
🧮 Thermal sensor count: 4–64
⏱️ Overtemp trip: 0.2–10 s
📊 Derate curve: 3–12 segments
🔐 Thermal state attested

2️⃣1️⃣ Environmental Sealing

🌡️ Temp band: −40 to 60 °C
🌊 Salt fog: marine class band
📊 Dust ingress: sealed band
🔁 Pressure equalization: 0–2 valves
📈 Condensation control: 1–6 heaters
🧮 UV exposure: 5–50 kWh/m²-year
📊 Coating thickness: 50–300 µm
🔐 Seal inspection logged

2️⃣2️⃣ Marine Motion Compensation

🌊 Sea state: 3–8
📏 Heave comp: 0.1–3.0 m
🔁 Sway comp: 0.05–1.0 m
📈 Roll comp: ±1–15°
🧮 Motion filter: 0.2–5 Hz
📊 Mooring load: 0.2–20 MN
⏱️ Lock under motion: 5–120 s
🔐 Harbor sync token

2️⃣3️⃣ Orbital Microgravity Capture

🛰️ Relative speed: 0.01–0.20 m/s
📏 Capture corridor: 0.2–5 m
🧲 Magnetic assist: 0–1 stage
🔁 Soft capture damp: 1–3 stages
📈 Vacuum connector rating: space band
🧮 Thermal expansion: 0.1–10 mm
⏱️ Mate time: 2–20 min
🔐 Orbital mate proof

2️⃣4️⃣ Mis-Mate Detection

📊 Misalign thresholds: 5–50 mm
📐 Tilt thresholds: 0.2–2.0°
⏱️ Detect time: 50–500 ms
🔁 Auto-abort stages: 2–5
📈 Damage avoidance: 1–10×
🧮 Force signature models: 10–200
📊 Sensor voting: 2–4 paths
🔐 Abort report signed

2️⃣5️⃣ Fault Isolation Segmentation

🔁 Segments: 2–16
📊 Segment rating: 0.5–25 MW
⏱️ Isolate time: 1–50 ms
📈 Propagate limit: 0–1 segment
🧮 Selectivity table: 10–300 rules
📊 Health counters: 20–500
🔁 Auto-reclose: 0–3 tries
🔐 Isolation ledger sealed

2️⃣6️⃣ Connector Wear & Erosion

🔩 Mate cycles: 10k–200k
📊 Contact erosion budget: band
⏱️ Arc exposure budget: band
📈 Clamp force drift: 1–10%
🧮 Lubrication interval: 0.5–5 years
📊 Debris tolerance: 0.1–5 mm
🔁 Auto-clean cycle: 0–1
🔐 Wear index signed

2️⃣7️⃣ Test & Validation Pack

🧪 Self-test duration: 10–300 s
📊 Built-in tests: 50–500 cases
🔁 Fault injection: 10–200 modes
📈 Power dummy loads: 0.5–50 MW
🧮 Link BER test: 1e−12 class
📊 Alignment calibration: 0.5–10 mm
⏱️ Dock dry-run: 2–30 min
🔐 Validation bundle sealed

2️⃣8️⃣ Multi-Dock Federation

🏗️ Docks/site: 1–50
📊 Shared DC bus: 1–20 kV
🔁 Shared data spine: 10–400 Gbps
📈 Dispatch latency: 0.2–5 s
🧮 Load balancing: 10–500 rules
📊 Contention control: 3–20 policies
🔁 Cross-dock handoff: 5–120 s
🔐 Federated identity

2️⃣9️⃣ Reliability Targets

📈 Availability: 99.0–99.9%
📊 MTBF: 1–15 years
🔁 Redundant paths: 2–6
⏱️ Fault clear: 1–50 ms
📈 Ops/day sustained: 10–200
🧮 Safety zone enforcement: 100%
📊 Audit retention: 1–30 years
🔐 Signed operations 100%

3️⃣0️⃣ Interface Envelope Summary

⚡ Transfer: 5–50 MWₑ
🔌 DC bus: 1–20 kV
📡 Data: 1–40 Gbps
⏱️ Cycle: 5–45 min
🔩 Ops/day: 10–200
📏 Tolerance: ±5–50 mm
🔋 Buffer: 1–100 MWh
🔐 Deterministic handshake: 100%

⚖️ Legal Block

⚖️ Owner: Built to Unite Inc.
📍 169 Madison Ave STE 38467
🏙️ New York, NY 10016, USA
🧾 Telemetry retention: audit-grade
🛡️ Doctrine: sealed lifecycle architecture
© Built to Unite Inc. — All rights reserved

For investors & strategic partners:
📩 [email protected]

🗓️ Last updated: February 2026